TermStepScience · Years 7 to 9

KS3 Science scheme of work

A lesson-by-lesson plan for Key Stage 3 Science, written to the National Curriculum in England: biology, chemistry and physics, with working scientifically built into every unit. Each year has six units, one per half-term, with ten core lessons each, so a school teaching science three times a week has room for assessment, review and extra practicals. Every unit lists its key words, practicals and demonstrations with safety notes, maths skills, common misconceptions and the GCSE topics it leads to.

Download the scheme of work (PDF)   Science roadmap

Every lesson has slides, opened with a TermStep plan: choose a unit on the roadmap, then a lesson's Slides link.

Roadmap

One line that climbs from the first week of Year 7 at the bottom to the end of Year 9 at the top, like the Computer Science map. Each stop is a half-term unit of 10 lessons: choose one to open its lessons and practicals.

Year 7Cells and labskillsAutumn 1BiologyParticlesAutumn 2ChemistryForcesSpring 1PhysicsReproductionSpring 2BiologyLight and soundSummer 1PhysicsSpaceSummer 2PhysicsYear 8MixturesAutumn 1ChemistryFood anddigestionAutumn 2BiologyElectricitySpring 1PhysicsReactions andacidsSpring 2ChemistryBreathing andrespirationSummer 1BiologyHeating andcoolingSummer 2PhysicsYear 9The periodictableAutumn 1ChemistryGenes andevolutionAutumn 2BiologyEnergySpring 1PhysicsEarth andatmosphereSpring 2ChemistryPressure andmomentsSummer 1PhysicsEcosystemsSummer 2Biology

Year 7

Starting secondary science: working safely in a lab, the cell and particle models, forces, reproduction, light and sound, and our place in space.

Half-termUnitStrandAssessment
Autumn 1Cells and working scientificallyBiologyEnd-of-unit test (40 minutes) on cells, specialised cells and organisation, with a practical-skills section on variables and magnification.
Autumn 2Particles and their behaviourChemistryEnd-of-unit test (40 minutes), including a six-mark explanation: why a balloon shrinks in the freezer.
Spring 1Forces and motionPhysicsEnd-of-unit test (40 minutes) with speed and weight calculations and a force-diagram question.
Spring 2Reproduction in animals and plantsBiologyEnd-of-unit test (40 minutes) plus an evaluated germination investigation.
Summer 1Light and soundPhysicsEnd-of-unit test (40 minutes) with a ray diagram and a waves question.
Summer 2Space: Earth, Sun and MoonPhysicsEnd-of-year test (50 minutes) covering the Year 7 units.
Cells and working scientificallyAutumn 1 · Biology · 10 lessons

Pupils learn to work safely in a lab, light a Bunsen burner and plan a fair test, then use a microscope to see animal, plant and single-celled organisms and learn how cells build tissues, organs and organisms.

Key words: hazard, risk, variable, fair test, cell, nucleus, cytoplasm, cell membrane, cell wall, chloroplast, vacuole, mitochondria, specialised cell, diffusion, tissue, organ, magnification

#Lesson and aimMain task and practical
1Working safely in the lab
Spot hazards and follow lab rules.
Find ten hazards in a picture of a lab, match hazard symbols to their meanings and agree five class lab rules.
Slides
2The Bunsen burner
Light, adjust and use a Bunsen burner safely.
Earn a Bunsen licence: light it, switch between the safety flame and the blue flame, heat water and turn it off.Class practical: Lighting a Bunsen burner and heating water in a boiling tube. Safety: Goggles, hair tied back, heatproof mat, safety flame when not heating, tube held with a holder and pointed away from people.
Slides
3Asking scientific questions
Plan a fair test with independent, dependent and control variables.
Plan and carry out a test of how drop height changes the bounce height of a ball, and record the results in a table.Class practical: Ball-bounce investigation with a metre rule. Safety: Clear floor space; stand clear of the drop.
Slides
4Is it alive?
Use the seven life processes to decide whether something is living.
Sort cards (car, fire, seed, robot, mushroom, crystal) using MRS GREN and justify each decision.
Slides
5Using a microscope
Set up a light microscope, focus on a specimen and work out the magnification.
Prepare an onion skin slide stained with iodine, focus at low then high power, draw what you see and calculate the total magnification.Class practical: Onion epidermis slide stained with iodine solution. Safety: Iodine stains and irritates eyes: goggles. Carry the microscope with two hands. Never point the mirror at the Sun.
Slides
6Animal and plant cells
Name the parts of animal and plant cells and say what each part does.
Label animal and plant cell diagrams, then compare them in a Venn diagram.Class practical: Prepared slides of animal cells and pondweed leaf cells. Safety: Glass slides and cover slips break easily: report breakages.
Slides
7Specialised cells
Explain how a cell's shape helps it do its job.
Match five specialised cells (red blood, nerve, sperm, root hair, palisade) to their jobs and explain one feature of each.
Slides
8Diffusion
Describe how substances move into and out of cells by diffusion.
Watch food colouring spread in hot and cold water, then explain how oxygen and carbon dioxide move into and out of cells.Teacher demonstration: Food colouring in beakers of hot and cold water. Safety: Hot water no hotter than 60 °C; beakers on a stable bench.
Slides
9Single-celled organisms
Describe how amoeba, euglena and yeast are adapted to survive.
Look at pond water under the microscope, then annotate drawings of amoeba and euglena with their adaptations.Class practical: Pond water drops on a slide. Safety: Wash hands after handling pond water; cover any cuts.
Slides
10From cells to organisms
Put cells, tissues, organs, organ systems and organisms in order.
Build an organisation ladder for the digestive and circulatory systems, then answer questions for the unit test.
Slides

Working scientifically: Hazards and risks, independent, dependent and control variables, results tables, using a microscope.

Maths skills: Total magnification = eyepiece × objective; reading scales; drawing a results table.

Common misconceptions:

  • Plant cells have no mitochondria (they do).
  • The cell wall controls what goes in and out (the membrane does).
  • All cells look the same.

Assessment: End-of-unit test (40 minutes) on cells, specialised cells and organisation, with a practical-skills section on variables and magnification.

Leads to: GCSE Biology cell biology and microscopy; the GCSE microscopy required practical; transport by diffusion.

Particles and their behaviourAutumn 2 · Chemistry · 10 lessons

Pupils use the particle model to explain the properties of solids, liquids and gases, changes of state, density, diffusion, gas pressure and expansion.

Key words: solid, liquid, gas, particle, particle model, density, melting point, boiling point, evaporation, condensation, sublimation, diffusion, gas pressure, Brownian motion, expansion

#Lesson and aimMain task and practical
1Solids, liquids and gases
Describe the properties of the three states of matter.
Sort substances into solids, liquids and gases, and test which can be squashed or poured.Teacher demonstration: Squashing sealed syringes of air, water and sand. Safety: Syringes sealed with caps; never point at people.
Slides
2The particle model
Use particle diagrams to explain the properties of each state.
Draw particle diagrams for each state and use them to explain shape, flow and compression.
Slides
3Density
Calculate density and explain it with particles.
Measure the mass and volume of blocks and an irregular object (by displacement), then calculate their densities.Class practical: Mass and volume of blocks; displacement can for an irregular object. Safety: Wipe up spills at once; heavy blocks kept low on the bench.
Slides
4Changes of state
Name and explain melting, freezing, boiling, evaporating, condensing and subliming.
Complete a change-of-state diagram and explain each change in terms of particles and energy.
Slides
5Cooling curves
Plot a cooling curve and find a melting point.
Record the temperature of cooling stearic acid every 30 seconds, plot the curve and mark where it freezes.Class practical: Cooling curve of stearic acid in a boiling tube. Safety: Hot wax: goggles, tube in a rack, water bath below 80 °C.
Slides
6Evaporation and boiling
Explain the difference between evaporation and boiling.
Test how surface area changes how fast water evaporates from paper towels, and explain the results with particles.Class practical: Drying of wet paper towels with different surface areas. Safety: Wipe up water spills to prevent slips.
Slides
7Diffusion
Explain diffusion in liquids and gases.
Time how food colouring spreads in water, then explain a demonstration of two gases meeting in a tube.Teacher demonstration: Ammonia and hydrogen chloride meeting in a long glass tube (teacher only). Safety: Done by the teacher in a fume cupboard; both gases are corrosive and irritant.
Slides
8Gas pressure
Explain gas pressure as particles hitting the walls of a container.
Explain the collapsing can demonstration and predict what happens to a balloon in hot and cold water.Teacher demonstration: Collapsing can: a can with a little boiling water turned into cold water. Safety: Teacher only; tongs and goggles; class stands back.
Slides
9Brownian motion
Describe and explain the random movement of tiny particles.
Watch smoke particles moving under a microscope (or a video) and model the motion with marbles on a tray.Teacher demonstration: Smoke cell under a microscope, or video. Safety: Teacher lights the smoke source; no flames near pupils.
Slides
10Expansion
Explain why solids, liquids and gases expand when heated.
Watch the ball-and-ring demonstration and explain why bridges and railways need expansion gaps.Teacher demonstration: Heated metal ball and ring. Safety: Teacher only; the ball stays hot for a long time: heatproof mat.
Slides

Working scientifically: Making and testing predictions with a model, plotting a line graph, taking temperature readings at set times.

Maths skills: Density = mass ÷ volume; plotting a cooling curve; reading a thermometer.

Common misconceptions:

  • Particles themselves melt or expand (they move or spread out).
  • There is air between the particles of a gas (there is nothing).
  • Ice loses mass when it melts.

Assessment: End-of-unit test (40 minutes), including a six-mark explanation: why a balloon shrinks in the freezer.

Leads to: GCSE Chemistry states of matter; GCSE Physics particle model of matter and the density required practical.

Forces and motionSpring 1 · Physics · 10 lessons

Pupils measure forces, tell mass from weight, investigate friction and drag, work out resultant forces, and describe motion with speed and distance–time graphs.

Key words: force, newton, newton meter, contact force, non-contact force, mass, weight, gravitational field strength, friction, drag, resultant force, balanced, unbalanced, speed, distance–time graph, relative motion

#Lesson and aimMain task and practical
1What forces do
Describe forces as pushes or pulls that change speed, direction or shape.
Draw force arrows on pictures and sort the forces into contact and non-contact.
Slides
2Measuring forces
Measure forces with a newton meter.
Measure the forces needed to lift, drag and open everyday objects and record them in newtons.Class practical: Newton meters on bags, drawers and blocks. Safety: Do not stretch a newton meter past its scale.
Slides
3Mass and weight
Explain the difference between mass and weight and calculate weight.
Weigh 100 g masses with a newton meter, plot weight against mass and use W = m × g.Class practical: Weighing slotted masses with a newton meter. Safety: Keep masses over the bench, not over feet.
Slides
4Friction
Investigate how the surface changes friction.
Pull a block across four surfaces with a newton meter, repeat three times and find the mean force.Class practical: Friction of a block on carpet, sandpaper, wood and plastic. Safety: Sandpaper edges can cut; pull slowly and steadily.
Slides
5Air and water resistance
Describe how drag depends on shape and speed.
Time paper spinners with different wing sizes falling from 2 m and explain the results using drag.Class practical: Paper spinners dropped from a fixed height. Safety: Drop from a stool only with the teacher's permission; no standing on chairs.
Slides
6Balanced and unbalanced forces
Work out the resultant force and predict the motion.
Calculate resultant forces in tug-of-war and vehicle diagrams and predict whether each object speeds up, slows down or stays the same.
Slides
7Speed
Calculate speed from distance and time.
Time classmates walking and a toy car rolling 10 m, then calculate each speed in m/s.Class practical: Timing over 10 m with stopwatches. Safety: Walk, do not run, in the corridor or hall.
Slides
8Distance–time graphs
Draw and read distance–time graphs.
Plot a journey from a table, then describe each section of three graphs.
Slides
9Relative motion
Describe motion relative to different observers.
Solve problems about trains passing, cars overtaking and walking on a moving walkway.
Slides
10Reaction time and stopping
Measure reaction time and link it to stopping distance.
Do the ruler-drop test five times, find your mean reaction time and explain why it matters for drivers.Class practical: Ruler-drop reaction test. Safety: Drop the ruler only, never catch near the face.
Slides

Working scientifically: Repeat readings and means, choosing equipment, drawing force diagrams, plotting and reading graphs.

Maths skills: Weight = mass × g; speed = distance ÷ time; means of repeat readings; gradients of distance–time graphs.

Common misconceptions:

  • A moving object needs a force to keep it moving.
  • Mass and weight are the same thing.
  • Heavier objects always fall faster.

Assessment: End-of-unit test (40 minutes) with speed and weight calculations and a force-diagram question.

Leads to: GCSE Physics forces, weight, resultant forces, speed and distance–time graphs.

Reproduction in animals and plantsSpring 2 · Biology · 10 lessons

Pupils learn how humans and flowering plants reproduce: reproductive systems, puberty, the menstrual cycle, fertilisation, pregnancy, flower structure, pollination, seed dispersal and germination.

Key words: gamete, sperm, egg cell, fertilisation, testes, ovary, oviduct, uterus, puberty, menstrual cycle, embryo, foetus, placenta, gestation, stamen, carpel, pollination, seed dispersal, germination

#Lesson and aimMain task and practical
1Why living things reproduce
Compare sexual and asexual reproduction.
Sort examples (strawberry runners, bacteria, frogs, humans, potatoes) and list one advantage of each type.
Slides
2Human reproductive systems
Name the parts of the male and female reproductive systems and their jobs.
Label both systems and match each organ to its job. Agree class ground rules first.
Slides
3Puberty
Describe the changes of puberty and why they happen.
Sort the changes into boys, girls and both, and write a reply to a worried pupil's letter.
Slides
4The menstrual cycle
Describe the main stages of the 28-day cycle.
Annotate a 28-day cycle diagram with menstruation, the lining building up and ovulation.
Slides
5Fertilisation and implantation
Describe how sperm and egg meet and how the embryo implants.
Put story cards from ejaculation to implantation in order and explain how the sperm cell is adapted.
Slides
6Pregnancy and birth
Explain how the placenta keeps the foetus alive and how lifestyle affects it.
Label the foetus in the uterus, then use data on smoking and alcohol to advise a pregnant woman.
Slides
7Flower structure
Identify the male and female parts of a flower.
Dissect a lily flower, stick each part on a card and label it.Class practical: Lily or alstroemeria dissection. Safety: Scalpels cut away from the body on a tile; lily pollen stains clothes; check for pollen allergies.
Slides
8Pollination
Compare insect and wind pollination and explain why insects matter for food.
Compare insect-pollinated and wind-pollinated flowers in a table, then work out which foods would vanish without bees.
Slides
9Seeds and dispersal
Describe how seeds form and are spread.
Make paper sycamore seeds and test how wing length changes how far they travel from a fan.Class practical: Paper seed models and a desk fan. Safety: Keep fingers and paper away from the fan blades.
Slides
10Germination
Plan an investigation into the conditions seeds need to germinate.
Set up cress seeds with and without water, warmth and light, and record what happens over a week.Class practical: Cress seeds on cotton wool in labelled dishes. Safety: Wash hands after handling seeds and soil.
Slides

Working scientifically: Dissection skills, planning an investigation over several days, recording observations.

Maths skills: Timelines in days and weeks; percentages of seeds that germinate.

Common misconceptions:

  • The baby's and mother's blood mix in the placenta.
  • Flowers are only for decoration.
  • Seeds need light to germinate.

Assessment: End-of-unit test (40 minutes) plus an evaluated germination investigation.

Leads to: GCSE Biology hormones and the menstrual cycle, sexual and asexual reproduction, plant reproduction.

Light and soundSummer 1 · Physics · 10 lessons

Pupils learn how waves carry energy, how sound travels and is heard, and how light reflects, refracts, forms images and splits into colours.

Key words: vibration, wave, amplitude, wavelength, frequency, hertz, pitch, longitudinal, transverse, medium, vacuum, ultrasound, luminous, reflection, refraction, normal, lens, spectrum, filter

#Lesson and aimMain task and practical
1Waves
Describe transverse and longitudinal waves and label their parts.
Make both kinds of wave on a slinky, then label amplitude, wavelength and frequency on a diagram.Class practical: Slinky springs on the floor. Safety: Do not let a stretched slinky go: it snaps back.
Slides
2How sound travels
Explain how sound travels through a medium and why it cannot cross a vacuum.
Watch the bell in a bell jar as the air is pumped out, then compare the speed of sound in air, water and steel.Teacher demonstration: Electric bell in a bell jar with a vacuum pump. Safety: Teacher only; the jar is behind a safety screen.
Slides
3Loudness and pitch
Link loudness to amplitude and pitch to frequency.
Look at sound waves on an oscilloscope app, then sketch waves for loud, quiet, high and low sounds.Teacher demonstration: Signal generator, loudspeaker and oscilloscope (or phone app). Safety: Keep volume low; tell the teacher if a sound hurts.
Slides
4Hearing and ultrasound
Describe how the ear works and how ultrasound is used.
Label the ear, test the class hearing range and read about ultrasound in scans and cleaning.
Slides
5How light travels
Describe how light travels and how shadows form.
Make shadows with a ray box and explain why light from the Sun reaches us through space.
Slides
6Reflection
Use the law of reflection.
Shine a ray at a plane mirror at five angles, measure the angles of incidence and reflection and write a conclusion.Class practical: Ray box and plane mirror on paper. Safety: Ray boxes get hot: switch off when not in use.
Slides
7Refraction
Describe and draw refraction at a boundary.
Trace rays through a glass block, draw the normals and describe how the ray bends going in and out.Class practical: Ray box and glass block. Safety: Glass blocks are heavy and can chip: keep them on the paper.
Slides
8Lenses and the eye
Describe how a lens forms an image and how the eye works.
Make a pinhole camera, look at the upside-down image and label the parts of the eye.Class practical: Pinhole camera from a tube and tracing paper. Safety: Never look at the Sun through the camera.
Slides
9Colour
Explain how white light splits and how filters and coloured objects work.
Split light with a prism, then predict and test the colours of objects under red and green light.Class practical: Prism, ray box and coloured filters. Safety: Ray boxes get hot; dim lights carefully, keep bags off the floor.
Slides
10Light and sound compared
Compare light and sound and use their speeds.
Complete a comparison table and work out how far away a storm is from the gap between lightning and thunder.
Slides

Working scientifically: Measuring angles with a protractor, drawing ray diagrams, using a model (slinky) to explain waves.

Maths skills: Measuring angles; distance = speed × time (thunder and lightning).

Common misconceptions:

  • Sound can travel through space.
  • We see because light comes out of our eyes.
  • A coloured filter adds colour to light (it removes colours).

Assessment: End-of-unit test (40 minutes) with a ray diagram and a waves question.

Leads to: GCSE Physics waves, sound, reflection and refraction, the electromagnetic spectrum.

Space: Earth, Sun and MoonSummer 2 · Physics · 10 lessons

Pupils explain day and night, the seasons, phases of the Moon and eclipses, compare weight on other planets, and see how our ideas about space changed with evidence.

Key words: Solar System, planet, orbit, axis, rotation, season, satellite, phases of the Moon, eclipse, star, galaxy, light year, gravity, geocentric, heliocentric

#Lesson and aimMain task and practical
1The Solar System
Describe the Sun, the planets and their order.
Build a toilet-roll scale model of planet distances along the corridor.
Slides
2Gravity and weight in space
Calculate weight on other planets.
Use a table of g values to work out your weight on the Moon, Mars and Jupiter.
Slides
3Day, night and years
Explain day, night and years using the Earth's spin and orbit.
Use a torch and a globe to show day and night, then answer questions on time zones.Class practical: Torch and globe in a dimmed room. Safety: Keep walkways clear while the room is dim.
Slides
4The seasons
Explain the seasons using the tilt of the Earth's axis.
Shine a torch on squared paper at two angles, count the squares lit and explain summer and winter.
Slides
5Phases of the Moon
Explain why the Moon seems to change shape.
Hold a ball at arm's length round a lamp, sketch each phase and label the cycle.Class practical: Polystyrene ball and a single lamp. Safety: The lamp bulb gets hot.
Slides
6Eclipses
Explain solar and lunar eclipses.
Draw labelled diagrams of both eclipses and explain why never to look at the Sun.
Slides
7Stars and galaxies
Describe stars, galaxies and the light year.
Order objects from the Moon to the observable universe by size and distance.
Slides
8Changing ideas about space
Explain how evidence changed the model of the Solar System.
Compare the geocentric and heliocentric models and explain how Galileo's observations supported the Sun-centred model.
Slides
9Exploring space
Describe how satellites, telescopes and probes help us learn about space.
Research one mission from a fact card and present it in two minutes.
Slides
10The scale of space
Use light years and the speed of light to compare distances.
Work out how long light takes to reach us from the Sun, the Moon and the nearest star, then revise for the end-of-year test.
Slides

Working scientifically: Using physical models, judging evidence, how scientific ideas change.

Maths skills: Weight = mass × g with other planets' values; scale models; large numbers and light years.

Common misconceptions:

  • Summer happens because the Earth is closer to the Sun.
  • The Moon's phases are caused by the Earth's shadow.
  • There is no gravity in space.

Assessment: End-of-year test (50 minutes) covering the Year 7 units.

Leads to: GCSE Physics space physics (separate science) and gravity; GCSE Combined Science forces.

Year 8

Building on Year 7: separating mixtures, food and the digestive system, electricity and magnetism, chemical reactions, breathing and exercise, and heating and cooling.

Half-termUnitStrandAssessment
Autumn 1Mixtures and separatingChemistryEnd-of-unit test (40 minutes) plus the rock salt practical write-up.
Autumn 2Food, digestion and healthBiologyEnd-of-unit test (40 minutes) plus a food-label analysis task.
Spring 1Electricity and magnetismPhysicsEnd-of-unit test (40 minutes) with circuit diagrams and a resistance calculation.
Spring 2Chemical reactions; acids and alkalisChemistryEnd-of-unit test (40 minutes) with equations to complete and a practical question on neutralisation.
Summer 1Breathing, respiration and exerciseBiologyEnd-of-unit test (40 minutes) plus an exercise-data analysis.
Summer 2Heating and coolingPhysicsEnd-of-year test (50 minutes) covering the Year 8 units.
Mixtures and separatingAutumn 1 · Chemistry · 10 lessons

Pupils learn what pure means in science, how substances dissolve, and how to separate mixtures by filtration, crystallisation, distillation and chromatography, ending with elements, compounds and mixtures.

Key words: pure, impure, mixture, solute, solvent, solution, soluble, insoluble, solubility, saturated, filtration, filtrate, residue, crystallisation, distillation, chromatography, element, compound

#Lesson and aimMain task and practical
1Pure substances and mixtures
Explain what pure means in science.
Sort labels (orange juice, distilled water, air, gold, sea water) and use melting point data to spot an impure sample.
Slides
2Dissolving
Explain dissolving with particles and show that mass is conserved.
Weigh water and salt before and after dissolving and explain why the mass stays the same.Class practical: Dissolving salt in water on a balance. Safety: Wipe spills; balances kept dry.
Slides
3Solubility
Investigate how temperature changes how much solute dissolves.
Add spatulas of sugar to water at three temperatures until no more dissolves, then plot the results.Class practical: Dissolving sugar at 20, 35 and 50 °C. Safety: Water no hotter than 50 °C; kettles used by the teacher.
Slides
4Filtration
Separate an insoluble solid from a liquid.
Separate sand from salty water and label the filtrate and residue.Class practical: Filtering a sand and salt water mixture. Safety: Goggles; glass funnels supported in a clamp or conical flask.
Slides
5Evaporation and crystallisation
Get a soluble solid back from a solution.
Heat the filtrate in an evaporating basin until crystals start to form, then leave it to crystallise.Class practical: Evaporating salt solution over a Bunsen burner. Safety: Goggles; stop heating before dry, as hot salt spits; let the basin cool.
Slides
6Distillation
Explain how distillation separates a liquid from a solution.
Label the distillation apparatus and explain each step from the demonstration of distilling inky water.Teacher demonstration: Distilling inky water with a Liebig condenser. Safety: Teacher only; anti-bumping granules; cold water runs in at the bottom of the condenser.
Slides
7Chromatography
Use chromatography to separate the dyes in an ink.
Run chromatograms of four felt-tip pens and a mystery ink and identify which pen wrote the note.Class practical: Paper chromatography of felt-tip inks in water. Safety: Pencil for the start line; keep the solvent below the line.
Slides
8The rock salt challenge
Plan and carry out a method to purify rock salt.
Write a step-by-step method, purify rock salt and evaluate how pure the salt is.Class practical: Purifying rock salt by dissolving, filtering and evaporating. Safety: Goggles; hot basins on heatproof mats; no tasting.
Slides
9Elements, compounds and mixtures
Tell elements, compounds and mixtures apart with particle diagrams.
Sort particle diagrams, then compare iron and sulfur mixed with iron sulfide.Teacher demonstration: Separating an iron and sulfur mixture with a magnet; a sample of iron sulfide to compare. Safety: The compound is shown, not made in class: heating sulfur gives off harmful fumes.
Slides
10Separating in the real world
Choose a separation method for a real problem and justify it.
Match methods to desalination, forensic ink tests, water treatment and crude oil, and justify each choice.
Slides

Working scientifically: Choosing apparatus, writing a method, controlling variables, identifying risks.

Maths skills: Line graphs of solubility against temperature; Rf values (stretch).

Common misconceptions:

  • A substance disappears when it dissolves.
  • Pure means natural or clean.
  • Mass is lost when something dissolves.

Assessment: End-of-unit test (40 minutes) plus the rock salt practical write-up.

Leads to: GCSE Chemistry pure substances, formulations, chromatography required practical, water treatment.

Food, digestion and healthAutumn 2 · Biology · 10 lessons

Pupils learn what a balanced diet contains, test foods for nutrients, follow food through the digestive system, see enzymes at work, and look at how drugs affect the body.

Key words: carbohydrate, lipid, protein, vitamin, mineral, fibre, balanced diet, deficiency, kilojoule, digestion, enzyme, amylase, small intestine, villi, absorption, gut bacteria, drug, addiction

#Lesson and aimMain task and practical
1Nutrients
Name the seven parts of a balanced diet and what each does.
Sort foods into nutrient groups and complete a table of what each nutrient is for.
Slides
2Food tests
Test foods for starch, sugar and protein.
Test four foods with iodine, Benedict's and biuret solutions, record the colours and decide what each food contains.Class practical: Iodine, Benedict's (in a hot water bath) and biuret tests. Safety: Goggles; Benedict's heated in a water bath, never over a flame; no tasting; check for food allergies.
Slides
3Energy in food
Compare the energy in different foods.
Burn small pieces of dried pasta and crispbread under a boiling tube of water and compare the temperature rises.Class practical: Burning food samples under a boiling tube of water. Safety: No nuts (allergies); goggles; hold the food on a mounted needle, heatproof mat.
Slides
4A balanced diet
Explain the effects of deficiency, obesity and starvation.
Plan a balanced day of meals for a teenager and explain what scurvy and rickets show about vitamins.
Slides
5The digestive system
Name the organs of the digestive system and their jobs.
Follow a sandwich through a model gut and label each organ on a diagram.Teacher demonstration: Model gut made from tights, a funnel and mashed food. Safety: Teacher only; wear gloves and clean up at once.
Slides
6Enzymes
Describe how enzymes break down large molecules.
Add amylase to starch, test drops with iodine every minute and time how long the starch takes to disappear.Class practical: Amylase and starch on a spotting tile with iodine. Safety: Goggles; amylase can cause allergic reactions: avoid skin contact.
Slides
7Absorption
Explain how the small intestine absorbs food.
Set up visking tubing with starch and glucose, test the water outside and explain the role of villi.Class practical: Visking tubing model gut. Safety: Goggles; Benedict's heated in a water bath only.
Slides
8Bacteria in the gut
Explain how gut bacteria help digestion and health.
Read about gut bacteria and design a poster on how diet keeps them healthy.
Slides
9Drugs and health
Describe how medicines and recreational drugs affect the body.
Use case studies on caffeine, nicotine and alcohol to describe effects on behaviour, health and life processes.
Slides
10Reading food labels
Use food labels to compare foods and make healthy choices.
Compare three breakfast cereals using their labels and recommend one, with reasons and numbers.
Slides

Working scientifically: Qualitative tests and recording colour changes, fair testing with enzymes, reading and comparing data.

Maths skills: Energy in food in kJ; percentages of reference intakes on food labels.

Common misconceptions:

  • Fat in the diet is always bad.
  • Digestion only happens in the stomach.
  • All bacteria are harmful.

Assessment: End-of-unit test (40 minutes) plus a food-label analysis task.

Leads to: GCSE Biology digestive system, enzymes, the food tests required practical, non-communicable disease.

Electricity and magnetismSpring 1 · Physics · 10 lessons

Pupils explain static charge, build and measure series and parallel circuits, calculate resistance, map magnetic fields and make and use electromagnets.

Key words: charge, static electricity, electric field, circuit, current, ampere, ammeter, potential difference, volt, voltmeter, series, parallel, resistance, ohm, conductor, insulator, magnetic field, pole, electromagnet, motor

#Lesson and aimMain task and practical
1Static charge and electric fields
Explain static charge and forces between charges.
Rub balloons and rods, test attraction and repulsion, and explain the results with electrons.Class practical: Balloons, polythene and acetate rods, cloths. Safety: Avoid static near computers; latex allergy check for balloons.
Slides
2Circuits and symbols
Draw circuit diagrams with standard symbols and build them.
Build four circuits from diagrams and draw diagrams for four photographed circuits.Class practical: Cells, bulbs, switches and leads. Safety: Low-voltage cells only; disconnect if a wire gets hot.
Slides
3Current
Measure current with an ammeter.
Measure the current at different points in a series circuit and describe the pattern.Class practical: Ammeters in series circuits. Safety: Low-voltage cells only; switch off between readings.
Slides
4Potential difference
Measure potential difference with a voltmeter.
Measure the potential difference across cells and bulbs and explain where the energy goes.Class practical: Voltmeters connected in parallel. Safety: Low-voltage cells only.
Slides
5Series and parallel circuits
Compare current and brightness in series and parallel circuits.
Build both circuits with two bulbs, measure the currents and explain why homes are wired in parallel.Class practical: Series and parallel bulb circuits with ammeters. Safety: Low-voltage cells only.
Slides
6Resistance
Calculate resistance and investigate how wire length affects it.
Measure current and potential difference for five lengths of wire, calculate resistance and plot a graph.Class practical: Resistance of constantan wire at different lengths. Safety: The wire gets hot: low voltage, switch off between readings.
Slides
7Magnets and magnetic fields
Describe magnetic poles and map a magnetic field.
Plot the field round a bar magnet with a compass and test which materials are magnetic.Class practical: Bar magnets, plotting compasses, sealed iron filings. Safety: Iron filings kept in sealed cases; keep magnets away from phones.
Slides
8The Earth's magnetic field
Explain how a compass uses the Earth's magnetic field.
Make a floating compass from a magnetised needle and use it to find north.Class practical: Magnetised needle on cork in water. Safety: Needles are sharp: pass them point-down.
Slides
9Electromagnets
Investigate what changes the strength of an electromagnet.
Test how the number of coils changes how many paperclips an electromagnet lifts.Class practical: Electromagnets from wire, an iron nail and a low-voltage supply. Safety: Coils get hot: low voltage, switch off between tests.
Slides
10Using electromagnets
Explain how electromagnets are used in motors, relays and cranes.
Watch a simple motor turn, then explain how one device uses an electromagnet in a short write-up.Teacher demonstration: A simple DC motor. Safety: Low voltage; keep fingers away from the spinning coil.
Slides

Working scientifically: Building circuits from diagrams, reading meters, tables and line graphs, identifying patterns.

Maths skills: Resistance = potential difference ÷ current; adding currents in parallel circuits.

Common misconceptions:

  • Current is used up as it goes round a circuit.
  • All metals are magnetic.
  • A battery stores charge that runs out.

Assessment: End-of-unit test (40 minutes) with circuit diagrams and a resistance calculation.

Leads to: GCSE Physics electricity, circuits, resistance required practical, magnetism and electromagnetism.

Chemical reactions; acids and alkalisSpring 2 · Chemistry · 10 lessons

Pupils tell chemical from physical changes, write word and simple symbol equations, test the conservation of mass, study combustion, decomposition and energy changes, then work with acids, alkalis, neutralisation and the reactivity of metals.

Key words: reactant, product, chemical change, physical change, word equation, formula, conservation of mass, combustion, oxidation, thermal decomposition, exothermic, endothermic, acid, alkali, pH, indicator, neutralisation, salt, reactivity series, displacement

#Lesson and aimMain task and practical
1Physical and chemical changes
Spot the signs of a chemical reaction.
Visit four small reaction stations, record what you see and decide whether each change is chemical or physical.Class practical: Reaction stations: bicarbonate and vinegar, melting ice, rusty nails, burning a splint. Safety: Goggles; teacher checks each station; splints lit only at the Bunsen station.
Slides
2Word and symbol equations
Write word equations and count atoms in simple formulae.
Turn reaction descriptions into word equations, then count the atoms in formulae such as CO2 and H2O.
Slides
3Conservation of mass
Show that mass is conserved in a reaction.
React bicarbonate and vinegar in an open flask and in a flask sealed with a balloon, and compare the masses.Class practical: Bicarbonate and vinegar on a balance, open and sealed. Safety: Goggles; do not overfill the balloon.
Slides
4Combustion
Describe combustion and test for its products.
Explain the fire triangle and test the gas from a burning candle with limewater.Class practical: Candle under a beaker; limewater test. Safety: Goggles; limewater is an irritant; candles on heatproof mats.
Slides
5Thermal decomposition
Describe thermal decomposition and test for carbon dioxide.
Heat copper carbonate, record the colour change and bubble the gas through limewater.Class practical: Heating copper(II) carbonate. Safety: Goggles; copper carbonate is harmful; remove the delivery tube from the limewater before you stop heating.
Slides
6Energy changes in reactions
Tell exothermic from endothermic reactions.
Measure the temperature change of two reactions and classify each one.Class practical: Magnesium ribbon in dilute hydrochloric acid; citric acid with sodium hydrogencarbonate. Safety: Goggles; acid no stronger than 1 mol/dm³; no flames near the hydrogen.
Slides
7Acids and alkalis
Use indicators and the pH scale.
Make red cabbage indicator and test household solutions, then place them on the pH scale.Class practical: Red cabbage indicator and universal indicator. Safety: Goggles; household solutions chosen by the teacher; wash spills off skin at once.
Slides
8Neutralisation
Describe neutralisation and find how much alkali neutralises an acid.
Add alkali drop by drop to acid with indicator and record the volume needed.Class practical: Dilute hydrochloric acid and sodium hydroxide with universal indicator. Safety: Goggles; both solutions dilute (0.5 mol/dm³ or less); sodium hydroxide is an irritant.
Slides
9Metals and acids
Describe the reaction of metals with acids and test for hydrogen.
React magnesium, zinc and copper with acid, compare the bubbling and test the gas with a lit splint.Class practical: Metals in dilute hydrochloric acid; squeaky pop test. Safety: Goggles; small pieces of metal only; dilute acid.
Slides
10Reactivity and displacement
Use the reactivity series to predict displacement reactions.
Place metals in copper sulfate solution, record which ones change and write the reactivity order.Class practical: Metals in copper(II) sulfate solution on a spotting tile. Safety: Goggles; copper sulfate is harmful; wash hands afterwards.
Slides

Working scientifically: Safe handling of acids and heating, observing and recording, gas tests, drawing conclusions.

Maths skills: Balancing mass before and after; reading temperature changes; the pH scale.

Common misconceptions:

  • Gas made in a reaction weighs nothing.
  • All acids are dangerous and strong.
  • Burning destroys matter.

Assessment: End-of-unit test (40 minutes) with equations to complete and a practical question on neutralisation.

Leads to: GCSE Chemistry chemical changes, energy changes, the neutralisation and temperature-change required practicals, the reactivity series.

Breathing, respiration and exerciseSummer 1 · Biology · 10 lessons

Pupils learn how the lungs exchange gases, how cells release energy by aerobic and anaerobic respiration, how yeast ferments, and how the skeleton and muscles work together during exercise.

Key words: lungs, trachea, bronchus, alveoli, diaphragm, intercostal muscles, gas exchange, aerobic respiration, anaerobic respiration, lactic acid, fermentation, skeleton, joint, ligament, tendon, antagonistic muscles

#Lesson and aimMain task and practical
1The gas exchange system
Name the parts of the gas exchange system and their jobs.
Label the lungs from trachea to alveoli and trace the path of an oxygen molecule.Teacher demonstration: Lung dissection (optional) or model lungs. Safety: Teacher only; gloves; meat from a butcher; pupils may watch on a screen.
Slides
2Breathing
Explain how the ribs and diaphragm move air in and out.
Use a bell jar model to explain breathing, then measure your lung volume with a bottle of water.Class practical: Lung volume by water displacement. Safety: New mouthpiece for each pupil; do not keep breathing out until dizzy.
Slides
3Gas exchange in the alveoli
Explain how the alveoli are adapted for gas exchange.
Annotate an alveolus diagram with four adaptations and explain how each one speeds up diffusion.
Slides
4Smoking and the lungs
Describe how smoking and asthma affect the gas exchange system.
Use data on smoking and lung disease to write a short leaflet for a health clinic.
Slides
5Aerobic respiration
Describe aerobic respiration and its word equation.
Compare inhaled and exhaled air with limewater and write the word equation for respiration.Class practical: Limewater test on inhaled and exhaled air. Safety: Goggles; limewater is an irritant; breathe in only through the right tube.
Slides
6Anaerobic respiration
Describe anaerobic respiration in muscles.
Count clothes-peg squeezes for ten 20-second periods and explain the fall with lactic acid.Class practical: Clothes-peg squeezing test. Safety: Stop if your hand hurts.
Slides
7Fermentation
Describe fermentation in yeast and its uses.
Set up yeast and sugar in bottles at three temperatures with balloons and compare how much gas forms.Class practical: Yeast and sugar fermentation with balloons. Safety: Water no hotter than 40 °C; latex allergy check.
Slides
8The skeleton
Describe the four jobs of the skeleton.
Label a skeleton diagram and match bones to support, protection, movement and making blood cells.
Slides
9Muscles and joints
Explain how antagonistic muscles move joints.
Build a card model arm with elastic bands and measure the force of different muscles with a newton meter.Class practical: Model arm; measuring muscle force with a newton meter or bathroom scales. Safety: Push or pull steadily; stop if anything hurts.
Slides
10Exercise and the body
Investigate how exercise changes pulse and breathing rate.
Measure your pulse and breathing rate at rest and after two minutes of exercise, then explain the changes.Class practical: Pulse and breathing rate before and after step-ups. Safety: Pupils with medical conditions may record instead; clear space; stop if dizzy.
Slides

Working scientifically: Measuring with repeat readings, comparing results, using models and evaluating their limits.

Maths skills: Means and ranges of pulse and breathing rates; bar charts.

Common misconceptions:

  • Breathing and respiration are the same thing.
  • We breathe in oxygen and breathe out only carbon dioxide.
  • Muscles can push.

Assessment: End-of-unit test (40 minutes) plus an exercise-data analysis.

Leads to: GCSE Biology gas exchange, aerobic and anaerobic respiration, the response to exercise.

Heating and coolingSummer 2 · Physics · 10 lessons

Pupils tell temperature from energy, explain conduction, convection and radiation with particles and waves, test insulators, and use the idea of thermal equilibrium.

Key words: temperature, thermometer, degrees Celsius, thermal energy store, internal energy, conduction, conductor, insulator, convection, convection current, radiation, infrared, thermal equilibrium, evaporation

#Lesson and aimMain task and practical
1Temperature and energy
Explain the difference between temperature and thermal energy.
Compare heating 100 ml and 200 ml of water by 10 °C and explain why one needs more energy.Class practical: Heating two volumes of water with a Bunsen burner. Safety: Goggles; tripod and gauze stay hot; heatproof mat.
Slides
2Energy and particles
Explain heating and changes of state with particles.
Draw particle diagrams for ice warming, melting and boiling, and explain the flat parts of a heating curve.
Slides
3Conduction
Explain conduction and compare conductors.
Fix pins with wax to rods of four metals, heat one end and time when each pin drops.Class practical: Conduction rods with wax and pins. Safety: Rods stay hot long after heating; goggles; heatproof mat.
Slides
4Convection
Explain convection currents in liquids and gases.
Draw the convection current from the demonstration and explain sea breezes.Teacher demonstration: A potassium manganate(VII) crystal heated in a beaker of water. Safety: Teacher only; the crystal is oxidising and harmful, so it is added with tweezers.
Slides
5Radiation
Describe infrared radiation and how surfaces affect it.
Measure the radiation from four faces of a Leslie cube and explain why houses in hot countries are painted white.Teacher demonstration: Leslie cube filled with hot water and an infrared thermometer. Safety: Hot water: the teacher fills the cube.
Slides
6Insulation
Investigate which material insulates best.
Wrap beakers of hot water in three materials, record the temperature every two minutes and plot cooling curves.Class practical: Cooling of insulated beakers of hot water. Safety: Water no hotter than 60 °C; carry beakers with care.
Slides
7Keeping homes warm
Explain how homes lose and keep thermal energy.
Use a thermal image and cost data to rank loft insulation, cavity walls and double glazing.
Slides
8Thermal equilibrium
Predict the final temperature when hot and cold objects meet.
Mix hot and cold water in different amounts, predict the final temperature and test it.Class practical: Mixing hot and cold water. Safety: Water no hotter than 60 °C.
Slides
9Animals keeping warm
Explain how size, shape and behaviour help animals keep warm.
Compare cooling in one large and several small test tubes of hot water, then link it to penguins huddling.Class practical: Huddling model with test tubes of hot water. Safety: Water no hotter than 60 °C; tubes in racks.
Slides
10Cooling by evaporation
Explain why evaporation cools things down.
Compare a dry thermometer with one wrapped in wet cotton wool and explain why sweating cools us, then revise for the end-of-year test.Class practical: Wet and dry thermometer bulbs. Safety: Thermometers roll: keep them in a tray.
Slides

Working scientifically: Controlling variables over time, plotting cooling curves, evaluating a method.

Maths skills: Temperature differences; plotting and comparing curves; surface area to volume ratio with cubes.

Common misconceptions:

  • Heat and temperature are the same thing.
  • Cold flows into things.
  • Metals feel cold because they are colder.

Assessment: End-of-year test (50 minutes) covering the Year 8 units.

Leads to: GCSE Physics energy, thermal insulation required practical, internal energy and specific heat capacity.

Year 9

The GCSE bridge: atoms and the periodic table, genes and evolution, energy and its cost, the Earth and its atmosphere, pressure and moments, and ecosystems, with more independent practical work.

Half-termUnitStrandAssessment
Autumn 1Atoms, elements and the periodic tableChemistryEnd-of-unit test (40 minutes) with a prediction question on an unfamiliar element in Group 1 or 7.
Autumn 2Inheritance, DNA and evolutionBiologyEnd-of-unit test (40 minutes) with a six-mark natural selection explanation.
Spring 1Energy: stores, transfers and costsPhysicsEnd-of-unit test (40 minutes) with an electricity bill calculation and a six-mark evaluation of energy resources.
Spring 2The Earth, atmosphere and resourcesChemistryEnd-of-unit test (40 minutes) with a climate-data question.
Summer 1Forces: pressure and momentsPhysicsEnd-of-unit test (40 minutes) with pressure and moment calculations and a graph question on Hooke's law.
Summer 2Photosynthesis, ecosystems and GCSE skillsBiologyEnd-of-Key Stage 3 test (60 minutes) across all three years, with a GCSE-style practical question.
Atoms, elements and the periodic tableAutumn 1 · Chemistry · 10 lessons

Pupils use the Dalton model and chemical formulae, see how models of the atom changed, and use the periodic table to compare metals and non-metals and the trends in Groups 1, 7 and 0, ending with everyday materials.

Key words: atom, element, compound, molecule, formula, chemical symbol, periodic table, group, period, metal, non-metal, alkali metal, halogen, noble gas, oxide, polymer, ceramic, composite

#Lesson and aimMain task and practical
1Atoms and elements
Describe Dalton's model of atoms and use chemical symbols.
Use symbol cards to match element names and symbols, then sort elements into everyday uses.
Slides
2Compounds and formulae
Name simple compounds and count the atoms in a formula.
Build molecules with modelling kits, write their formulae and name them (-ide, -ate).
Slides
3Changing models of the atom
Describe how models of the atom changed with new evidence.
Put the Dalton, Thomson and Rutherford models on a timeline and explain what evidence changed each one.
Slides
4The periodic table
Explain how the periodic table is arranged in groups and periods.
Read about Mendeleev, then use the gaps he left to predict the properties of a missing element.
Slides
5Metals and non-metals
Compare the properties of metals and non-metals.
Test samples for shine, conductivity and how they bend, and place them on the periodic table.Class practical: Testing element samples with a simple circuit. Safety: Sulfur and iodine samples stay in sealed tubes; low-voltage cells.
Slides
6Group 1: the alkali metals
Describe the reactions of Group 1 metals with water and the trend down the group.
Record the demonstration, describe the trend and predict how rubidium would react.Teacher demonstration: Lithium, sodium and potassium in water (teacher only). Safety: Rice-grain pieces, safety screen, goggles, class 2 m back; potassium may spit.
Slides
7Group 7: the halogens
Describe the halogens and the trend in reactivity down the group.
Use data and the displacement results to put chlorine, bromine and iodine in order of reactivity.Teacher demonstration: Halogen displacement reactions (video, or teacher in a fume cupboard). Safety: Chlorine and bromine are toxic: video or fume cupboard only.
Slides
8Group 0: the noble gases
Explain why the noble gases are unreactive and how they are used.
Match noble gases to their uses and explain the link between being unreactive and each use.
Slides
9Metal and non-metal oxides
Compare the oxides of metals and non-metals.
Burn magnesium, test its oxide with universal indicator and compare it with the oxide of a non-metal.Class practical: Burning magnesium ribbon in tongs; testing the oxide with indicator. Safety: Do not look straight at burning magnesium; goggles; small pieces only.
Slides
10Polymers, ceramics and composites
Compare the properties of polymers, ceramics and composites.
Test material samples for strength, flexibility and hardness, then choose materials for a bike frame and a mug.Class practical: Bend, scratch and drop tests on material samples. Safety: Goggles: ceramics can shatter; drop only from bench height onto a tray.
Slides

Working scientifically: Using models, spotting trends in data, predicting from patterns.

Maths skills: Counting atoms in formulae; reading trends from tables of melting points.

Common misconceptions:

  • Atoms of an element can be different elements.
  • All metals are hard and dense.
  • Molecules are always compounds.

Assessment: End-of-unit test (40 minutes) with a prediction question on an unfamiliar element in Group 1 or 7.

Leads to: GCSE Chemistry atomic structure, the periodic table, Groups 1, 7 and 0, and materials.

Inheritance, DNA and evolutionAutumn 2 · Biology · 10 lessons

Pupils measure variation, learn how DNA, genes and chromosomes carry inherited information, and explain selective breeding, natural selection, evolution and extinction.

Key words: variation, continuous, discontinuous, inherited, environmental, DNA, gene, chromosome, allele, selective breeding, natural selection, adaptation, evolution, fossil, extinction, biodiversity, gene bank

#Lesson and aimMain task and practical
1Variation
Describe continuous and discontinuous variation.
Measure hand span and record tongue rolling across the class, then draw a histogram and a bar chart.
Slides
2Causes of variation
Explain genetic and environmental causes of variation.
Sort features into genetic, environmental or both, using data on identical twins.
Slides
3DNA, genes and chromosomes
Describe how DNA, genes and chromosomes are related.
Extract DNA from strawberries and draw a diagram linking cell, nucleus, chromosome, gene and DNA.Class practical: Strawberry DNA extraction with salt, washing-up liquid and cold ethanol. Safety: Goggles; ethanol is highly flammable: no flames in the room.
Slides
4Discovering DNA
Describe how Watson, Crick, Franklin and Wilkins worked out the structure of DNA.
Read the story of Photo 51 and explain how each scientist's evidence helped.
Slides
5Passing on genes
Explain how genes pass from parents to offspring.
Model inheritance with coloured beads for alleles and, as a stretch, complete a simple cross.
Slides
6Selective breeding
Explain how humans breed plants and animals for useful features.
Plan a breeding programme for a high-yield wheat or a calm dog and list one risk.
Slides
7Natural selection
Explain natural selection step by step.
Play the peppered moth hunt on light and dark backgrounds, then explain the results using natural selection.Class practical: Paper moth hunt on newspaper and dark card. Safety: Clear floor space.
Slides
8Evidence for evolution
Use fossils and antibiotic resistance as evidence for evolution.
Put horse fossils in order and explain how resistant bacteria show evolution happening now.
Slides
9Extinction
Explain how changes in the environment can lead to extinction.
Use case studies (the dodo, the woolly mammoth, the red squirrel) to explain the causes of extinction.
Slides
10Protecting biodiversity
Explain how gene banks and conservation protect species.
Read about seed banks and write a short case for saving one endangered species.
Slides

Working scientifically: Collecting class data, choosing the right graph, how scientists work together and use evidence.

Maths skills: Bar charts and histograms; ratios and probabilities in simple crosses (stretch).

Common misconceptions:

  • Animals choose to adapt during their lifetime.
  • Evolution is just a theory with no evidence.
  • Humans evolved from chimpanzees.

Assessment: End-of-unit test (40 minutes) with a six-mark natural selection explanation.

Leads to: GCSE Biology inheritance, genetic crosses, variation and evolution, selective breeding, classification.

Energy: stores, transfers and costsSpring 1 · Physics · 10 lessons

Pupils describe energy stores and transfers, draw Sankey diagrams, calculate work done, power and the cost of electricity, and compare fossil fuels with renewable energy resources.

Key words: energy store, kinetic, gravitational potential, elastic, thermal, chemical, energy transfer, conservation of energy, dissipation, Sankey diagram, efficiency, work done, joule, power, watt, kilowatt-hour, fossil fuel, renewable

#Lesson and aimMain task and practical
1Energy stores
Name the main energy stores and give examples.
Identify the energy stores in eight pictures, from a stretched bow to a cup of tea.
Slides
2Energy transfers
Describe how energy is transferred and that it is conserved.
Describe the transfers at five stations (a wind-up toy, a falling ball, a kettle) and say where energy is wasted.Class practical: Energy transfer stations. Safety: Kettle used by the teacher only.
Slides
3Sankey diagrams and efficiency
Draw Sankey diagrams and calculate efficiency.
Draw Sankey diagrams for a bulb and an LED and work out which is more efficient.
Slides
4Work done
Calculate work done as force × distance.
Pull a block up a ramp with a newton meter, measure the force and distance and calculate the work done.Class practical: Pulling a block up a ramp with a newton meter. Safety: Keep ramps stable; masses over the bench.
Slides
5Energy in food and fuels
Compare the energy in foods and fuels in kilojoules.
Use food labels and fuel data to compare energy values and work out minutes of activity for each snack.
Slides
6Power
Calculate power and compare the power ratings of appliances.
Time yourself walking and running up stairs, calculate your power and compare it with appliances.Class practical: Measuring personal power on a flight of stairs. Safety: Walk or run only with the teacher's say-so; hold the rail.
Slides
7Paying for electricity
Calculate the cost of using appliances in kilowatt-hours.
Work out a week's electricity bill for a family from appliance power ratings and times.
Slides
8Fossil fuels
Explain how a power station makes electricity and the problems fossil fuels cause.
Put the steps of a power station in order and list three problems with fossil fuels.
Slides
9Renewable energy
Describe how renewable resources generate electricity.
Test how the number of blades changes the output of a model wind turbine.Class practical: Model wind turbine with a fan and a voltmeter. Safety: Keep fingers away from the blades.
Slides
10Choosing energy resources
Evaluate energy resources for a town.
Use data on cost, reliability and pollution to choose an energy mix for a town and justify it.
Slides

Working scientifically: Calculations with units, comparing data, evaluating arguments with evidence.

Maths skills: Work done = force × distance; power = energy ÷ time; cost = power (kW) × time (h) × price; efficiency as a fraction or percentage.

Common misconceptions:

  • Energy gets used up.
  • Renewable means it has no effect on the environment.
  • A higher-power appliance always costs more to run.

Assessment: End-of-unit test (40 minutes) with an electricity bill calculation and a six-mark evaluation of energy resources.

Leads to: GCSE Physics energy stores, work, power, efficiency, the national grid and energy resources.

The Earth, atmosphere and resourcesSpring 2 · Chemistry · 10 lessons

Pupils study the structure of the Earth and the rock cycle, the atmosphere and the carbon cycle, how humans are changing the climate, and how we extract and recycle the Earth's resources.

Key words: crust, mantle, core, igneous, sedimentary, metamorphic, rock cycle, weathering, erosion, atmosphere, carbon cycle, greenhouse effect, climate change, finite resource, ore, extraction, reduction, recycling

#Lesson and aimMain task and practical
1The structure of the Earth
Describe the crust, mantle and core.
Make a scale model of the Earth's layers and label each with its state and temperature.
Slides
2Rocks and the rock cycle
Describe how igneous, sedimentary and metamorphic rocks form.
Examine rock samples, sort them into three types and draw the rock cycle.Class practical: Rock samples and hand lenses. Safety: Do not drop rocks; wash hands after handling.
Slides
3Crystal size in igneous rocks
Explain how cooling rate changes crystal size.
Melt salol and let it cool on a warm and a cold slide, then compare the crystals.Class practical: Salol crystals on warm and cold slides. Safety: Goggles; salol is an irritant; water bath for melting, no flames.
Slides
4Weathering and erosion
Describe physical, chemical and biological weathering.
Drip dilute acid on limestone and granite, record what happens and explain chemical weathering.Class practical: Dilute hydrochloric acid on rock samples. Safety: Goggles; dilute acid only; rinse rocks afterwards.
Slides
5The atmosphere
Describe the gases in the atmosphere and how it has changed.
Draw a pie chart of today's atmosphere and put the changes since the early Earth on a timeline.
Slides
6The carbon cycle
Describe how carbon moves between living things, the air, oceans and rocks.
Build the carbon cycle from process cards and label photosynthesis, respiration, combustion and decay.
Slides
7Climate change
Explain how human activity is changing the climate.
Use temperature and carbon dioxide graphs to explain the link and list three effects of climate change.
Slides
8Earth's resources
Explain why some resources are finite and how we can use them more carefully.
Sort resources into finite and renewable and work out how long some metals will last.
Slides
9Extracting metals
Explain how carbon is used to extract metals from their ores.
Heat copper oxide with carbon, observe the copper and write the word equation.Class practical: Copper(II) oxide and carbon heated in a crucible (or teacher demo). Safety: Goggles; heat strongly in a fume cupboard or well-ventilated room; crucibles stay hot.
Slides
10Recycling and life cycles
Compare the life cycles of products and the case for recycling.
Compare the life cycle of a glass bottle and a plastic bottle and decide which is better for the planet.
Slides

Working scientifically: Interpreting graphs of real data, judging the quality of evidence, separating fact from opinion.

Maths skills: Pie charts of the atmosphere; reading trends from climate graphs; percentages.

Common misconceptions:

  • The greenhouse effect is the same as climate change.
  • The hole in the ozone layer causes global warming.
  • Rocks never change.

Assessment: End-of-unit test (40 minutes) with a climate-data question.

Leads to: GCSE Chemistry the atmosphere, climate change, using resources, life-cycle assessment and metal extraction.

Forces: pressure and momentsSummer 1 · Physics · 10 lessons

Pupils calculate pressure on solids and in fluids, explain upthrust and floating, test Hooke's law, use the principle of moments and explain how forces change motion.

Key words: pressure, pascal, area, upthrust, density, atmospheric pressure, extension, Hooke's law, elastic limit, moment, pivot, principle of moments, lever, gear, acceleration, resultant force

#Lesson and aimMain task and practical
1Pressure on solids
Calculate pressure as force ÷ area.
Draw round your shoe on squared paper, find its area and work out the pressure you put on the floor.Class practical: Shoe area on squared paper and a bathroom scale. Safety: Take turns on the scale; stand still.
Slides
2Pressure in liquids
Explain why pressure in a liquid increases with depth.
Explain the water jets from a bottle with holes at three depths and why dams are thicker at the bottom.Teacher demonstration: Water bottle with holes at three heights. Safety: Done over a sink or tray; wipe up spills.
Slides
3Upthrust and floating
Explain floating and sinking using upthrust and weight.
Weigh objects in air and in water, work out the upthrust and predict which will float.Class practical: Newton meter and a tank of water. Safety: Wipe spills to prevent slips; keep electrics away.
Slides
4Atmospheric pressure
Explain why air pressure changes with height.
Explain the upturned glass of water with card and work out why ears pop on a plane.Teacher demonstration: Upturned glass with card over a tray. Safety: Over a tray; plastic cup rather than glass.
Slides
5Hooke's law
Investigate how the extension of a spring depends on the force.
Add masses to a spring, measure the extension each time, plot a graph and find the limit of proportionality.Class practical: Stretching a spring with slotted masses. Safety: Goggles in case the spring flies off; G-clamp the stand; masses over a tray.
Slides
6Moments
Calculate the moment of a force.
Use a spanner and door handle activity, then calculate moments with moment = force × distance.
Slides
7The principle of moments
Use the principle of moments to balance objects.
Balance masses on a metre rule at different distances and check the principle of moments.Class practical: Balancing a metre rule on a pivot with masses. Safety: Masses over the bench; keep the pivot stable.
Slides
8Levers and gears
Explain how levers and gears make jobs easier.
Sort tools into three types of lever and work out how a bike's gears change the turning force.
Slides
9Forces and changing motion
Explain how unbalanced forces change speed and direction.
Roll a trolley down a ramp at different angles, time it and describe how the resultant force changed its motion.Class practical: Trolley on a ramp with light gates or stopwatches. Safety: Catch the trolley at the bottom; keep the ramp clear.
Slides
10Engineering with forces
Apply pressure and moments to a design problem.
Design and test a lifting arm from card and syringes, then evaluate it with forces and moments.Class practical: Card and syringe lifting arm. Safety: Syringes without needles; do not point at people.
Slides

Working scientifically: Planning an investigation, line graphs and lines of best fit, spotting anomalous results.

Maths skills: Pressure = force ÷ area; moment = force × distance; proportional relationships; lines of best fit.

Common misconceptions:

  • Heavy objects always sink.
  • Pressure and force are the same thing.
  • A spring stretches by the same amount for ever.

Assessment: End-of-unit test (40 minutes) with pressure and moment calculations and a graph question on Hooke's law.

Leads to: GCSE Physics forces, the force and extension required practical, moments, pressure in fluids and acceleration.

Photosynthesis, ecosystems and GCSE skillsSummer 2 · Biology · 10 lessons

Pupils explain photosynthesis and plant nutrition, food webs and interdependence, sample a habitat, and practise the planning, analysis and evaluation skills they will need at GCSE.

Key words: photosynthesis, chlorophyll, chloroplast, stomata, glucose, limiting factor, mineral, producer, consumer, food web, predator, prey, interdependence, bioaccumulation, quadrat, accuracy, precision, anomaly

#Lesson and aimMain task and practical
1Photosynthesis
Describe photosynthesis and test a leaf for starch.
Test a leaf that was kept in the light and one kept in the dark for starch, and write the word equation.Class practical: Testing a leaf for starch with ethanol in a hot water bath and iodine. Safety: Ethanol is highly flammable: kettle water only, no flames in the room; goggles.
Slides
2Leaves
Explain how a leaf is adapted for photosynthesis.
Make a nail-varnish peel of a leaf, count the stomata under the microscope and label a leaf cross-section.Class practical: Nail-varnish stomata peel. Safety: Use nail varnish in a ventilated room; carry microscopes with two hands.
Slides
3The rate of photosynthesis
Investigate how light intensity changes the rate of photosynthesis.
Count the bubbles from pondweed with a lamp at five distances and plot the results.Class practical: Pondweed bubbling at different lamp distances. Safety: Lamps get hot; keep water away from mains plugs; LED lamps if possible.
Slides
4Plant minerals
Describe the minerals plants need and what happens without them.
Match pictures of deficient plants to the missing mineral and explain why farmers use fertilisers.
Slides
5Food chains and webs
Describe how energy flows through food chains and webs.
Build a food web for a pond from cards and trace three food chains in it.
Slides
6Interdependence
Predict what happens when one species in a food web changes.
Use predator–prey graphs (lynx and hare) to explain what happens when one population changes.
Slides
7Toxins in food chains
Explain how toxins build up in food chains.
Model bioaccumulation with counters and explain what happened to birds of prey when DDT was used.
Slides
8Sampling a habitat
Use quadrats to estimate a population.
Sample daisies on the school field with quadrats, find the mean per quadrat and estimate the total.Class practical: Random quadrat sampling on the school field. Safety: Stay in the marked area; wash hands afterwards; check for pollen and bee-sting allergies.
Slides
9GCSE skills: planning and evaluating
Use accuracy, precision, repeatability and anomalies to evaluate an investigation.
Evaluate a sample method and results from a GCSE-style practical and suggest improvements.
Slides
10GCSE skills: analysing data
Analyse graphs and draw conclusions like a GCSE scientist.
Draw lines of best fit, find gradients and write conclusions from three data sets, then revise for the end-of-Key Stage 3 test.
Slides

Working scientifically: Planning, sampling, analysing and evaluating like a GCSE scientist: accuracy, precision, repeatability and anomalies.

Maths skills: Means from quadrat samples; estimating a population; inverse relationships (light and distance); gradients.

Common misconceptions:

  • Plants get their food from the soil.
  • Plants respire only at night.
  • Energy is recycled in a food chain.

Assessment: End-of-Key Stage 3 test (60 minutes) across all three years, with a GCSE-style practical question.

Leads to: GCSE Biology photosynthesis and the rate of photosynthesis required practical, ecology and the field investigation required practical, and the working scientifically skills of every GCSE science.

After Year 9

The units lead into GCSE Biology, Chemistry and Physics or Combined Science (AQA, Edexcel, OCR) and Cambridge IGCSE Biology, Chemistry, Physics and Co-ordinated Sciences. Year 9 ends with the planning, analysis and evaluation skills the GCSE required practicals test.

Practicals and demonstrations are suggestions: check every one against your school's risk assessments and CLEAPSS guidance before teaching it.